Main technical parameters:

I electrical part

(1) Relay, AC contactor, breaker are brand of Fuji.

(2) PLC controller is brand of Omron.

(3) Buttons, middle relay are brand from Korea.

(4) Other parts are made in China, famous brand.

II technical parameter

(1) Total kneader volume is 125 L.

(2) Total mix volume is 55 L.

(3) Driven motor is 75 KW.

(4) Overturn motor is 2.2 KW.

(5) Overturn angle is 140 degree.

(6) Rotating speed of rotor (front/rear) 32/26.

(7) Pressure of compressed air: 0.6-0.8 MP.

(8) Rotor shaft is made of steel(45#), long short arris body is also

   made of steel(45#), work side of the arris and ridge of arris are 

   made of durable alloyed steel, HV for the middle part of the 

   rotor after polishing is more than 900.

(9) Side plate of the mixing chamber is made of steel(45#), middle

   part is shape of 'W', which is low alloy structure, steel 16 Mn, HV 

    after polishing is more than 1000.

(10) Frame is made of qualified steel (Q235).

(11) Speed reducer: Hard faced, low noise level, long life span.

    Especially for the kneader intensive ( more than 75 L), cooling 

    system is added, which assures the oil temperature will not too

    high in summer.

(12) Circumrotate fittings are brand of Yangguang (from Taiwan), 

    quality is first class, life span is long.

(13) Gear cover is structure of up and down, separately, which is 

    easy to check and change oil seal, there is no need to uninstall

    the speed reducer.

(14) Oil seal is NAK brand from Taiwan. Anti-leaking.

(15) Seal ring is non-metal material, which is better than the former

    copper material, wear and tear of the rotor face is reduced.